CAMELBAK EDDY™ STAINLESS INSULATED 0.5L

CAMELBAK EDDY™ STAINLESS INSULATED 0.5L

Double-walled vacuum-sealed construction keeps your water cool for hours and prevents condensation from forming on the outside of the bottle. Naturally 100% BPA-Free, taste-free stainless steel doesn’t require inner liners or plastic coatings like those used in aluminium bottles. Redesigned cap for greater durability and faster flow from our patented flip-top bite valve that lets you sip without tipping or spilling. Integrated loop handle for carrying convenience. Dishwasher safe.


PRODUCT FEATURES

Double-Wall vacuum insulation keeps water cool for hours

Flip, Bite and Sip. No tipping required (though possible: just remove the straw)

Durable and spill-proof

Easy to carry: Integrated loop handle makes it easy to clip a carabiner or carry with the crook of a finger

Taste-free stainless steel is 100% Free of BPA and BPS. No inner liners or plastic coatings that aluminIum bottles require.

Wide-mouth opening is easy to fill with ice and water and a breeze to clean


PRODUCT SPECIFICATIONS

  • Hydration Capacity: 16 oz / .5 L
  • Total Weight: 13.4 oz
  • Always: 100% BPA-Free
  • Warranty: Got Your Bak™ Lifetime Guarantee
  • Bottle Material: BPA-Free 304 Stainless Steel
  • Cap Material: BPA-Free Polypropylene
  • Bite Valve Material: The CamelBak Big Bite™ Valve is made from medical grade silicone

Write a review

Please login or register to review

CLEANING THE EDDY STAINLESS

 

The eddy Stainless bottle can be easily cleaned with a bottle brush using warm water and mild soap.

 

Cleaning the lid:


The bite valve, straw and lid can be cleaned in the top rack of the dishwasher or by hand with warm, soapy water. Pull off the bite valve and straw from the cap. If you like to use a bottle brush, we don’t recommend forcing a brush through the Bite Valve slit. If you have the brush kit, run the small brush through the straw.

 

For a deeper cleaning, add a drop of mild soap or tablespoon of bleach to a clean glass jar filled with water. Drop the bite valve, straw and cap into the solution, and tightly close the jar’s lid. Shake the mixture around for 30 seconds, and then let the parts soak for about 15 minutes. Rinse and shake dry.

 

To re-assemble the lid:


Flip the stem collar (the component the bite valve attached to originally) to the open position. Orient the bite valve so the finger tab points towards the front of the cap. Push the bite valve firmly onto the stem collar. Press the straw back into place on the bottom of the lid. Ensure the straw covers the notches completely.

DO I NEED TO CLEAN THE BOTTLE BEFORE FIRST USE?

 

The stainless steel bottle is easily cleaned by hand with a bottle brush, using warm water and mild soap if desired.

 

The cap assembly can be cleaned in the top rack of a household dishwasher. The straw and bite valve may be removed from the cap to help provide better cleaning of the inside passages of the cap. It’s a good idea to place small parts in a top-rack basket, if available.

 

HOW DO I CLEAN THE CAMELBAK® STAINLESS STEEL BOTTLES?

 

The stainless steel bottle can be easily cleaned by hand with a bottle brush using warm water and mild soap.

 

The straw, bite valve and cap are dishwasher-safe. Simply remove the straw and bite valve from the cap and place in the top rack for washing, or hand-wash with warm water and soap.

 

THE BITE VALVE ON MY NEW BOTTLE DOESN'T HAVE A SLIT (OPENING) AND I CAN'T DRINK FROM IT

 

The self-sealing silicone can sometimes seal tightly before first use. To open, squeeze the bite valve and twist & roll between your fingertips. This should loosen the seal and open it up for drinking.

 

SOME OTHER BOTTLES TALK ABOUT “EXTRUDED” CONSTRUCTION. HOW ARE YOUR STAINLESS STEEL BOTTLES CONSTRUCTED?

 

Metal extrusion is a process by which a single piece of metal is compressed under extremely high pressures to stretch it into a new shape, like a bottle. Extrusion processes place a lot of stress on the material and also consume a lot of energy. Our stainless steel bottles are made with a welded construction. At the start, a precision-rolled sheet of steel is cut and formed under low pressure into the shape of the bottle, then welded. Finally the bottle is ground and brushed to provide a finished appearance. Welded construction gives more freedom and control over product shape and design, and also enables us to create a lightweight double-wall vacuum bottle for our .5L insulated eddy™.

 

CAN/HOW DO I FREEZE THE CAMELBAK® EDDY™ WITH BITE VALVE?

 

You can freeze the bottle but make sure:

  • The bottle is not completely full when you do this (we recommend only 3/4 full to allow for expansion of the water as it freezes to ice).
  • The bottle is right side up

 

We also recommend that the bite valve stem NOT be flipped up or down if there is any frozen water in the tube. Wait until thawed.

 

CAN I USE THE CAMELBAK® EDDY™ IN HIGH-ALTITUDE/ LOW-PRESSURE ENVIRONMENTS (I.E. AIRPLANES, MOUNTAIN ALTITUDES, ETC)?

 

Yes, but with special care because pressure can force liquid out through the straw. Keep the bottle right side up with the bite valve in the closed position. Remove the straw for additional protection. Expect a bit of “spurt” during the first sip. You may also twist the cap open to release any pressure and then close before your first sip.

 

CAN I PUT HOT LIQUIDS IN IT? 

 

We do not recommend using hot beverages in the stainless steel bottles due to the risk of burns from drinking hot liquid from a straw. Additionally, the single-wall metal bottle (.7L ) does not insulate your hand from the heat of the contents.

  • Brand: CAMELBAK
  • Product Code: 53387
  • Availability: In Stock
  • Rs 2,499
  • Reward Points: 125